home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
MacWorld 1998 March
/
Macworld (1998-03) (Disk 1).dmg
/
System Utilities
/
Disinfectant
/
Disinfectant.rsrc
/
STR#_231.txt
< prev
next >
Wrap
Text File
|
1997-07-09
|
14KB
|
751 lines
requested. Nothing is printed in this case.
This alert appears when printing if there are no pages in the range you
range.
• You selected the page range xxx through yyy. There are no pages in this
from your disk and replace it with a known “good” copy of Disinfectant.
notification occurs, you must remove this particular copy of Disinfectant
modified. This may mean that it has been infected by a virus. If this
Disinfectant checks itself when it starts up and notifies you if it has been
copy.
otherwise modified. Please delete this copy and use an original unmodified
• This copy of Disinfectant has been damaged, infected by a virus, or
a MacMag-infected HyperCard stack.
This alert is presented by the Disinfectant protection INIT when it detects
Disinfectant to remove the virus.
• The stack “xxxxxxxxxx” is infected by the MacMag virus. Use
then ask you to reinsert the disk being scanned.
insert a different disk, and save the report on that disk. Disinfectant will
If you have a single floppy system, you may eject the disk being scanned,
Clear button clears the report field without saving and continues the scan.
Cancel button cancels the scan without clearing or saving the report. The
report as a text file, clears the report field, and continues the scan. The
Save, Cancel, and Clear. Save is the default button. It saves the partial
approaches the size limit, you will get this alert, with three buttons:
never be affected by this limit. If you produce a very long report which
Disinfectant has an upper limit for the size of the report. Most people will
continue. Save the report?
• The report is too big. It must be saved or cleared before the scan can
INIT on a locked startup disk.
This alert is presented if you try to install the Disinfectant protection
locked.
• The protection INIT could not be installed because the startup disk is
page size.
square available for printing after taking into account the margins and
that are too big. Disinfectant requires that there be at least a five inch
This alert appears in the “Page Setup” dialog if you specified margins
click the Cancel button.
• The margins you specified are too large. Please make them smaller or
an INIT file which has been infected by the INIT 1984 virus.
This alert is presented by the Disinfectant protection INIT when it detects
Disinfectant to remove the virus.
• The INIT file “xxxxxxxxxx” is infected by the INIT 1984 virus. Use
font size.
This alert appears in the “Page Setup” dialog if you enter a ridiculous
click the Cancel button.
• The font size must be in the range 1 through 24. Please correct it or
of the file. Unlock the old version of the file and try again.
to install or save the protection INIT and there is already a locked version
This alert appears if you try to save a report or the manual or if you try
• The file could not be saved because the old version of the file is locked.
then try to save to a different disk.
not enough room on the disk to save the file. Click the OK button. You may
This alert appears if you try to save a report or the manual and there is
• The file could not be saved because the disk is full.
to select landscape orientation instead of portrait orientation.
(over 18 points) and you get this alert, try using the Page Setup command
large margins. If you are trying to print a report in a very large font size
This alert may appear if you try to print with a large font size and/or
orientation.
might also try printing with landscape orientation instead of portrait
the left and right margins smaller or make the font size smaller. You
on the right. To correct this problem, use the Page Setup command. Make
• The document cannot be printed because some pages would be truncated
large margins.
This alert may appear if you try to print with a large font size and/or
Make the margins smaller or make the font size smaller.
on the bottom. To correct this problem, use the Page Setup command.
• The document cannot be printed because some pages would be truncated
a WDEF-infected disk or a CDEF-infected disk.
This alert is presented by the Disinfectant protection INIT when it detects
Desktop file on the disk or use Disinfectant to remove the virus.
• The disk “xxxxxxxxxx” is infected by the yyyy virus. Rebuild the
some other disk. There is no Cancel button in this situation.
case, you can either unlock and reinsert the original disk or you can insert
“scanning station” option is checked in the Preferences window. In this
This second form of the unlock alert is used only when the special
reinsert the disk or insert the next disk to be repaired.
• The disk cannot be repaired because it is locked. Please unlock and
operation and return to Disinfectant.
reinsert it. You can use the Cancel button in the alert to cancel the
automatically begin scanning and repairing the disk as soon as you
and puts up this alert. Unlock and reinsert the disk. Disinfectant will
If you try to disinfect a locked floppy disk, Disinfectant ejects the disk
reinsert the disk.
• The disk cannot be repaired because it is locked. Please unlock and
command.
This alert is presented when you select the “Install Protection INIT”
Disinfectant without restarting, select the OK button.
applications! To restart now, select the Restart button. To return to
will lose all changes to any documents which may be open in other
your Macintosh to activate the INIT. WARNING: If you restart now, you
• The Disinfectant protection INIT has been installed. You must restart
an infected application.
This alert is presented by the Disinfectant protection INIT when it detects
Disinfectant to remove the virus.
• The application “xxxxxxxxxx” is infected by the yyyyy virus. Use
quits without saving the report.
and then quits. The Cancel button returns to Disinfectant. The Quit button
which lets you choose the location of the saved report, saves the report,
three buttons: Save, Cancel, and Quit. The Save button presents a dialog
messages for infected files. If it does, this alert is presented. There are
When you quit Disinfectant, it checks to see if the report contains any
• Save report before quitting?
returns to Disinfectant. The Clear button clears without saving the report.
report, saves the report, and then clears the report. The Cancel button
button presents a dialog which lets you choose the location of the saved
presented. There are three buttons: Save, Cancel, and Clear. The Save
contains any messages for infected files. If it does, this alert is
When you clear the report, Disinfectant checks to see if the report
• Save report before clearing?
it by the new one.
save operation. Click the Replace button to delete the old file and replace
the same name already exists. Click the Cancel button to abort the file
This alert is presented when you install the protection INIT if a file with
• Replace existing “Disinfectant INIT”?
This informative message is displayed during printing.
period (.).
• Printing “xxxxx.” To cancel, hold down the Command key and type a
reported in the message. Click the OK button to return to Disinfectant.
you would send a note to the author. Please specify the error number
number. This alert should not occur. If it does, we would appreciate it if
An unexpected error occurred during printing. “nnnn” is the error
• Printing error (error code = nnnn).
printer. Use the Chooser desk accessory to select a printer.
This alert occurs if you try to print when there is no currently selected
• Printing error—you must use the Chooser to select a printer.
and try printing again.
Unlock the startup disk, or create an unlocked copy of your startup disk,
This alert occurs if printing fails because the startup disk is locked.
• Printing error—the startup disk is locked.
disk, then try printing again.
complete a printing operation. Try to make more room on your startup
This alert occurs if there is not enough room on your startup disk to
• Printing error—the startup disk is full.
same folder as your System file.
ImageWriter, you must have the system file named “ImageWriter” in the
driver has not been properly installed. For example, to print on an
This alert occurs if you try to print a report or the manual and the printer
• Printing error—could not locate printer driver in System folder.
some time, so you should be patient.
information from the disk that it might need later. This can take quite
and/or the System file. Before ejecting the disk, Disinfectant loads all the
This message is displayed if you eject the disk containing Disinfectant
• Please wait…
unusual circumstances.
alert described here is much less common, although it is possible in some
then Disinfectant will continue to scan the next file. The “Out of memory”
check this file” in the report section of the main Disinfectant window, and
file, you will get the error message “There is not enough memory to
In most cases, if Disinfectant does not have enough memory to check a
Disinfectant again.
Disinfectant in the Get Info window. Close the Get Info window. Run
command in the “File” menu. Increase the amount of memory allocated to
the Disinfectant program icon in the Finder. Select the Finder’s “Get Info”
If you get this error, you should give Disinfectant more memory. Select
the “Quit” button, Disinfectant quits.
This alert is presented if Disinfectant runs out of memory. When you click
try running it again.
the Finder’s “Get Info” command to give Disinfectant more memory, then
• Out of memory. Disinfectant has unexpectedly run out of memory. Use
button, Disinfectant quits to the Finder.
on an earlier system, it will present this alert. When you click the OK
Disinfectant requires System 6.0 or later. If you try running Disinfectant
• Disinfectant requires System 6.0 or later.
Disinfectant cannot be used on Macs with the old 64K ROMs.
the Mac 128K, 512K, or XL.
• Disinfectant requires a Mac 512KE or newer model. It does not work on
“Notification options” section of the Preferences window.
infected file) and you have selected the “Also display alert” option in the
requires your attention (for some reason other than the discovery of an
This alert is presented if, while running in the background, Disinfectant
• Disinfectant requires attention.
and you click the Denied button instead of the Granted button by mistake.
You may also get this alert if you are using the regular version of Vaccine
is a special version that was prepared just for the University of Michigan.
The version of Vaccine mentioned in the alert is not the normal Vaccine. It
canceled and the Disinfect button is disabled.
presents this alert. When you click the OK button, the current scan is
applications. If Disinfectant detects such a virus prevention tool, it
that it is impossible for Disinfectant to properly repair infected
Some virus prevention tools can interfere with Disinfectant in such a way
repair infected files.
check for viruses, but you will not be able to use the Disinfect button to
Disinfectant to repair files. You may use Disinfectant on this system to
remove this version of Vaccine from your System folder before using
University of Michigan version of Vaccine (Vaccine.UofM). You must
privileges. Another possible reason is that you are using the special
is that you are using Gatekeeper and you forgot to grant Disinfectant
• Disinfectant is unable to repair files on this system. One possible reason
Preferences window.
“Also display alert” option in the “Notification options” section of the
MultiFinder, Disinfectant finds an infected file and you have selected the
This alert is presented if, while running in the background under
• Disinfectant has found an infected file.
Disinfectant and we would appreciate it if you would notify the author.
INIT. This alert should not happen. If it does, it might be an error in
while trying to save a copy of the manual, a report, or the protection
This alert is presented if Disinfectant encounters an unexpected error
• An unexpected error (nnn) occurred while trying to save a file.
the old version.
to leave the old version installed. Installing the new version also removes
Click the Install button to install the new version. Click the Cancel button
Extensions folder. If an old version is installed, this alert is presented.
Disinfectant INIT is installed in the currently active System folder or
When Disinfectant starts up, it checks to see if an old version of the
you want to install the new version?
• An old version of the Disinfectant INIT is installed on this system. Do
to return to Disinfectant. Click the Quit button to quit Disinfectant.
Click the Restart button to restart your Macintosh. Click the Cancel button
were found, this alert is presented.
infected files were found in the currently active System folder. If any
When you quit after a disinfection run, Disinfectant checks to see if any
using a locked startup floppy and run Disinfectant again.
could become reinfected. You should immediately restart your Macintosh
• A virus may still be active in memory. Some of your files may have or
alphabetical order, with a brief explanation of each one.
This section presents all of Disinfectant’s alerts and dialogs, in
åAlerts and Dialogs
4
4